Miracote MiraPatch RM 1 is a polymer-modified two-component smoothing and resurfacing compound for concrete floors and decks. Applied to any thickness from 3" to featheredge with superior adhesion to prepared substrates. MiraPatch RM 1 has very high compression strength and it can be left exposed to industrial-type traffic or covered with almost any type of floor covering - carpet, resilient tile, even the very hard troweled resin floor systems.
Compared to conventional concrete toppings, MiraPatch RM 1 has greatly improved adhesion, greater abrasion resistance, less shrinkage, greater resistance to water and salt penetration, and better tensile strength.
MiraPatch RM 1 is Zero-VOC, virtually odorless, and environmentally safe. It requires no special training for installation and is easily handled by a handyman mason. It sets rapidly, can be applied over damp (not wet) surfaces, and can be installed at temperatures as low as 50�F (10�C).
Where to Use
Use MiraPatch RM 1 for interior or exterior structural repair applications on spalled, deteriorated or scaling concrete decks and industrial floors. MiraPatch RM 1 is specially designed to prepare concrete for Miracote polymeric floor finishes.
Mixing/Volume - Miracote MiraPatch RM 1 is two components and packaged in 5-gallon pails of Miracote MiraPatch RM 1 Liquid and 50-pound bags of Miracote MiraPatch RM 1 Powder. Standard mix is two gallons to three bags. This quantity covers approximated 60 sq. ft. (5.56 sq m) in a 1/4� (6.3 mm) thickness. In a �skim coating�, a two gallon-three bag mix will cover about 160 sq. ft. (14 .86 sq m). Mix with drill mixer, or by mortar box and hoe, or in a plaster mixer.